Skip to main content

TI Difet References: OPA627 Selection and Gain Stability | Texas Instruments

Resolve legacy Difet labels to the exact amplifier, checking OPA627 gain stability, input leakage and supply headroom.

TI Difet References: OPA627 Selection and Gain Stability

Resolve legacy Difet labels to the exact amplifier, checking OPA627 gain stability, input leakage and supply headroom.

Difet appears in legacy precision-amplifier descriptions, but it is not a complete ordering specification. The OPA627 devices in this selection should be evaluated using their current manufacturer data sheet. TI’s revision history explicitly records removal of Difet references; that naming change alone does not establish that an ordering code is obsolete or electrically interchangeable with another amplifier.

OPA627 is a precision JFET-input amplifier that is unity-gain stable. The related OPA637 requires a gain of at least five for stability, making it an unsuitable automatic substitute in a voltage follower. In an inverting or frequency-shaped circuit, evaluate noise gain and loop behavior rather than relying solely on the signal-gain label.

Low input bias current is useful for high-impedance sensors, but board leakage, contamination and temperature can dominate the error budget. Review the input layout and the grade-specific bias and offset limits. The documented ±4.5 V to ±18 V supply range also requires headroom planning; do not interpret a legacy precision-amplifier label as rail-to-rail input or output capability.

Key Features

  • Legacy-label resolutionUse the complete OPA ordering code and current revision.
  • Gain-stability distinctionOPA627 and OPA637 have different minimum-gain behavior.
  • High-impedance error controlInclude board leakage and temperature in the bias-current budget.

Target Applications

  • High-impedance sensor amplification
  • Precision data-acquisition stages
  • DAC output amplification

Compare Difet® Variants

Comparison of 6 selected variants from Texas Instruments

ParameterOPA627AUG4OPA627AUE4OPA627AU/2K5G4OPA627AU/2K5E4OPA627AU/2K5OPA627AU
Package / Case8-SOIC (0.154", 3.90mm Width)8-SOIC (0.154", 3.90mm Width)8-SOIC (0.154", 3.90mm Width)D8-SOIC (0.154", 3.90mm Width)D
Max Operating Temp+ 85 C--85 °C-85°C
Min Operating Temp- 25 C---25 °C--25°C
Operating Temperature-25°C ~ 85°C-25°C ~ 85°C-25°C ~ 85°C--25°C ~ 85°C-25°C ~ 85°C
Amplifier TypeGeneral PurposeGeneral PurposeGeneral PurposeGENERAL PURPOSEGeneral PurposeGENERAL PURPOSE
Current Input Bias2 pA2 pA2 pA-2 pA2 pA
Current Output Channel45 mA45 mA45 mA-45 mA45 mA
Current Supply7mA7mA7mA-7mA7mA
Gain Bandwidth Product16 MHz16 MHz16 MHz16 MHz16 MHz16MHz
Lifecycle StatusActiveActiveObsoleteProductionActiveActive
Number of Channels1 Channel--1-1
Number of Circuits111111
Operating Supply Current7 mA--7 mA-7mA
Output Current Per Channel45 mA--45 mA-45mA
Package8-SOIC-8-SOIC--D
SeriesOPA627-Difet®OPA627-Difet®
Slew Rate55V/µs55V/µs55V/µs55V/µs55V/µs55V/µs
Supplier Device Package8-SOIC8-SOIC8-SOIC-8-SOIC8-SOIC
Supply Voltage36 V--36 V-36V
Voltage Input Offset130 µV130 µV130 µV-130 µV130 µV
Voltage Supply Span Max36 V36 V36 V-36 V36 V
Voltage Supply Span Min9 V9 V9 V-9 V9 V
Request QuoteRequest QuoteRequest QuoteRequest QuoteRequest QuoteRequest Quote
Selection Guide
📦Package
8-SOIC (0.154", 3.90mm Width)→OPA627AUG4OPA627AUE4OPA627AU/2K5G4OPA627AU/2K5
D→OPA627AU/2K5E4OPA627AU

Base Numbers

MPN counts describe each base number’s catalog coverage; they are not a series total.

Base NumberDescriptionVariantsAction
OPA627AUOPA627AU variants from Texas Instruments3 MPNsView Details

Technical Specifications

OPA627 is the catalog example; its specifications are not attributes of every device historically described as Difet.

Documented parameters and selection boundaries

OPA627 stability
Unity-gain stable
OPA637 comparison
Stable at gains ≥5
Documented supply range
±4.5 V to ±18 V
Naming history
Current data sheet records removal of Difet references

Frequently Asked Questions

Common technical questions about the Difet® series.

No. Check lifecycle information for the exact orderable code; a naming revision is a separate matter.
No automatic substitution is appropriate: OPA637 has a minimum stable-gain requirement.
Leakage through the board, connectors or contamination can exceed the amplifier’s own input current.