Skip to main content

Excalibur Bipolar Precision Op Amps | Texas Instruments

Compare the TLE2022 and TLE2022A offset grades and allow for input bias current in a precision DC stage.

When the tighter offset grade matters

TI lists a maximum 25 °C input offset of 0.6 mV for the TLE2022 and 0.4 mV for the TLE2022A. In a stage with a noise gain of ten, those terms alone correspond to 6 mV and 4 mV at the output.

The bipolar input stage also draws bias current. Multiply that current by the effective source resistance at each input to estimate an additional error that a tighter voltage-offset grade may leave largely unchanged.

The input common-mode range includes the negative rail. Check the required output swing separately, especially when a high-gain stage approaches ground under load.

Target Applications

  • Precision DC gain stages

Technical Specifications

When the tighter offset grade matters

TLE2022 maximum offset at 25 °C
0.6 mV
TLE2022A maximum offset at 25 °C
0.4 mV

Frequently Asked Questions

Common technical questions about the Excalibur™ series.

The difference in the stated maximum offset contributions is 2 mV at 25 °C. Bias current, drift and resistor tolerance remain separate terms.