Skip to main content

CC2640: Bluetooth LE MCU for Existing SimpleLink Designs | Texas Instruments

Review CC2640 Bluetooth LE designs by software baseline, memory use, package I/O and RF implementation before choosing a replacement.

CC2640: Bluetooth LE MCU for Existing SimpleLink Designs

Review CC2640 Bluetooth LE designs by software baseline, memory use, package I/O and RF implementation before choosing a replacement.

CC2640 is a SimpleLink Bluetooth Low Energy wireless MCU based on Cortex-M3. For an existing design, preserve the exact device and software baseline while evaluating supply alternatives.

TI lists 128 KB flash and 20 KB RAM for CC2640. Application code and the wireless software share a finite memory budget; confirm the complete firmware image rather than choosing solely by an RF headline.

GPIO availability differs with package. Match the ordering code to board connections and the RF implementation. A similarly named wireless MCU should be evaluated for firmware and hardware changes instead of treated as a packaging-only substitution.

Key Features

  • Wireless functionBluetooth Low Energy MCU.
  • Compute platformArm Cortex-M3 with a sensor controller listed by TI.
  • Package decisionCheck GPIO count and the complete board pinout.

Target Applications

  • Bluetooth LE sensor nodes
  • Maintenance of CC2640-based wireless products

Technical Specifications

Review CC2640 Bluetooth LE designs by software baseline, memory use, package I/O and RF implementation before choosing a replacement.

Selection scope

Flash
128 KB
RAM
20 KB
Protocol scope
Bluetooth Low Energy

Frequently Asked Questions

Common technical questions about the CC2640 Series series.

No. Compare the firmware support, peripherals, pinout and RF design.
No. Verify available signals for the exact package ordering code.