Wearable Electronics
Build the optical or motion sensor path, radio link, and power budget around the wearable's form factor.
About Wearable Electronics
A wearable electronics platform combines a small battery and power tree with a processor, wireless link, display or haptic loads, and sensors placed against or near the body. Motion sensing may use an accelerometer or IMU; optical biosensing commonly combines LEDs, a photodiode, and an analog front end; other product types use temperature, pressure, or electrical electrodes.
Optical measurement depends on the mechanical and analog stack as well as the algorithm. LED wavelength and current, photodiode area, optical window, skin contact, ambient light, motion artifacts, TIA range, sampling schedule, and accelerometer data can all affect the signal available to the processor. A reference design's performance does not guarantee a product's measurement accuracy.
The battery budget must include sensor excitation, processing, radio connection and data bursts, display or haptic use, charging, and regulator losses. Check the physical stack-up, thermal path, antenna clearance, and operating schedule together; a low-power MCU or sensor by itself does not define product runtime.
Component Requirements
Typical functions, devices, and parameters in Wearable Electronics.
| System function | Typical devices | Key parameters | Browse |
|---|---|---|---|
| Optical and biometric signal chain Drives optical emitters and converts photodiode current into data for local processing. | Optical AFEs, TIAs, LED drivers, photodiodes, precision references | LED wavelength and current, TIA range, ambient cancellation, sample rate | View category |
| Motion and environmental sensors Measures movement, orientation, temperature, or other product-specific signals. | Accelerometers, gyroscopes, temperature sensors, sensor hubs | Noise density, range, sample rate, standby current | View category |
| Processor and personal-area radio Runs local sensor acquisition and sends user or device data to a paired endpoint. | Low-power MCUs, BLE SoCs, memory, antenna matching | Wake time, radio role, connection interval, memory | View category |
| Battery and wearable power Regulates, charges, and protects the battery-powered device rails. | PMICs, chargers, fuel gauges, buck converters, load switches | Quiescent current, peak load, charge current, thermal rise | View category |
Design & Selection Considerations
Sensor modality and mechanical stack
Identify optical, inertial, temperature, or electrode sensing and document contact pressure, optical window, skin spacing, board location, and enclosure materials.
AFE and sampling schedule
Set LED wavelength and drive, photodiode or electrode range, gain, ambient cancellation, ADC resolution, sample rate, filtering, and processor wake cadence.
Motion and wireless workload
Specify IMU range and rate, BLE role and connection interval, data bursts, antenna location, coexistence, and expected phone or hub distance.
Battery, charging, and heat
Define battery chemistry and size, peak load, charge path, protection, rail sequencing, average-use profile, skin-contact temperature, and package thermal path.
Supply Chain Considerations
Sensor performance depends on the assembled product
Optical stack, ambient light, motion, skin contact, component tolerance, and algorithms affect the signal. Include the enclosure and validation setup when comparing a sensor AFE or LED driver.
Battery claims require a use profile
The reference design's runtime follows its cell, firmware schedule, radio settings, and event rate. Provide the intended active, sleep, display, and transmission schedule rather than comparing reference-design lifetime labels.
Supply Chain Support
Wearable BOM by sensing path
Separate optical or electrode AFE, LEDs and photodiodes, IMU, processor and memory, BLE radio, PMIC, charger, and haptics or display loads.
Mechanical and energy conditions
Provide board and enclosure revision, optical window and sensor spacing, antenna location, battery, charge profile, temperature limits, and use-state current measurements.
Frequently Asked Questions
Motion can change the optical path between an LED and photodiode and create artifacts in the sampled signal. An accelerometer or IMU can provide context to the signal-processing algorithm, while ambient-light cancellation and suitable AFE gain help with the optical chain. The final result depends on sensor placement, mechanics, sampling, and firmware validation.
Profile the complete product across its use states: sensor LED and AFE activity, processor wake time, BLE connection and transmit bursts, display or haptic duty, charge and protection circuits, and idle periods. Include battery impedance and end-of-life conditions, then measure the real current waveform on the assembled device.