Texas Instruments TLV3701IP Specialty Logic
IC OUT COMPARATOR NANOPWR 8-DIP
Same model may have multiple batches, images only for reference.
Technical Specifications
Texas Instruments TLV3701IP Specialty Logic technical specifications.
General
Related Parts Comparison (TLV3701IP vs TLV3701QDBVRG4Q1 vs TLV3701QDBVRQ1 vs TLV3701QDBVREP)
Side-by-side specifications of related catalog parts.
Engineering verification required. Related parts may have different electrical ratings, pinouts, footprints, and operating limits. Verify suitability for your circuit before substitution.
| This Part | Related Part | Related Part | Related Part | |
|---|---|---|---|---|
| Package / Case | 8-DIP | SC-74A, SOT-753 | SC-74A, SOT-753 | SC-74A, SOT-753 |
| Mounting Type | Through Hole | Surface Mount | Surface Mount | Surface Mount |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C | -40°C ~ 125°C | -40°C ~ 125°C |
| Lifecycle Status | Active | Active | Active | Active |
| CMRR PSRR Typ | 88dB CMRR, 105dB PSRR | 88dB CMRR, 105dB PSRR | 88dB CMRR, 105dB PSRR | 88dB CMRR, 105dB PSRR |
| Current Input Bias Max | 250pA @ 15V | 250pA @ 5V | 250pA @ 5V | 250pA @ 5V |
| Current Output Typ | 10mA | 10mA | 10mA | 10mA |
| Current Quiescent Max | 1µA | 1.2µA | 1.2µA | 1.2µA |
| Number of Elements | 1 | 1 | 1 | 1 |
| Output Type | PUSH-PULL | CMOS, Push-Pull, Rail-to-Rail | CMOS, Push-Pull, Rail-to-Rail | CMOS, Push-Pull, Rail-to-Rail |
| Type | General Purpose | General Purpose | General Purpose | General Purpose |
| Voltage Input Offset Max | 5mV @ 15V | 5mV @ 5V | 5mV @ 5V | 5mV @ 5V |
| Action |
Texas Instruments TLV3701IP Specialty Logic Overview
Single nanropower high-voltage comparator, featuring a 36µs response time and 120dB voltage gain. Operates with a dual supply voltage range from 1.35V to 5V, with a maximum dual supply of 8V. Offers a high Common Mode Rejection Ratio of 88dB and Power Supply Rejection Ratio of 105dB.
This component has a low input bias current of 250pA and a maximum supply current of 800nA. Packaged in an 8-PDIP for through-hole mounting, it operates from -40°C to 125°C.
