Skip to main content

SoundPlus Audio Op Amps for Line-Level Stages | Texas Instruments

Use the OPA2134 dual FET-input amplifier to examine source impedance, noise gain and output loading.

Tracing noise and distortion through a stereo stage

The OPA2134 gives a stereo line stage two amplifier channels in one package. Its FET inputs suit high-impedance sources where input bias current flowing through the source resistance would otherwise introduce a DC error.

In an active filter, evaluate noise using the impedance seen at each input and the circuit’s noise gain. The input voltage-noise figure alone omits resistor noise and the gain applied to each contribution.

Review the distortion curves at the intended frequency, gain, output level and load. A buffer feeding a line input works under different conditions from a stage driving a low-impedance load directly.

Target Applications

  • Stereo line buffers and active audio filters

Technical Specifications

Tracing noise and distortion through a stereo stage

Example
OPA2134 dual audio amplifier
Input stage
FET

Frequently Asked Questions

Common technical questions about the SoundPlus™ series.

Use the curve closest to the actual output level, load, gain and frequency. Include the following stage’s input impedance in the load.