Analog Devices AD744KNZ Amplifiers - Instrumentation, OP Amps, Buffer Amps
J-FET Amplifier 1 Circuit 8-PDIP

Same model may have multiple batches, images only for reference.
Manufacturer
Part Number (MPN)
AD744KNZ
Category
Detailed Description
IC OPAMP JFET 1 CIRCUIT 8DIP
Package
8-DIP (0.300", 7.62mm)
Key Features
Package / Case: 8-DIP (0.300", 7.62mm); Mounting Type: Through Hole
Lifecycle Status
Active
RoHS State
RoHS Compliant
Datasheet
AD744KNZ Datasheet
Quick Jump:
Technical Specifications
Analog Devices AD744KNZ Amplifiers - Instrumentation, OP Amps, Buffer Amps technical specifications.
General
Package / Case
8-DIP
Mounting Type
Through Hole
Operating Temperature
0°C ~ 70°C
Lifecycle Status
Active
Current Supply
3.5mA
Number of Circuits
1
Amplifier Type
J-FET
3db Bandwidth
13 MHz
Current Output Channel
25 mA
Slew Rate
75V/µs
Alternate Parts Comparison (AD744KNZ vs AD708JNZ vs AD8031BNZ vs AD8031ANZ)
Side-by-side technical parameter comparison of related primary models in this product family.
| This Part | Alternate Parts | Alternate Parts | Alternate Parts | |
|---|---|---|---|---|
| Package / Case | 8-DIP | 8-DIP | 8-DIP | 8-DIP |
| Mounting Type | Through Hole | Through Hole | Through Hole | Through Hole |
| Operating Temperature | 0°C ~ 70°C | 0°C ~ 70°C | -40°C ~ 85°C | -40°C ~ 85°C |
| 3db Bandwidth | 13 MHz | 900 kHz | 80 MHz | 80 MHz |
| Amplifier Type | J-FET | General Purpose | Voltage Feedback | Voltage Feedback |
| Current Input Bias | 30 pA | 1 nA | 450 nA | 450 nA |
| Current Supply | 3.5mA | 4.5mA | 900µA | 900µA |
| Number of Circuits | 1 | 2 | 1 | 1 |
| Slew Rate | 75V/µs | 0.3V/µs | 35V/µs | 35V/µs |
| Voltage Input Offset | 250 µV | 30 µV | 500 µV | 1 mV |
| Voltage Supply Span Max | 36 V | 36 V | 12 V | 12 V |
| Voltage Supply Span Min | 9 V | 6 V | 2.7 V | 2.7 V |
| Action |
More Parts in Operational Amplifiers, Instrumentation Amplifiers and Buffer Amplifiers
Browse additional parts from the same category, grouped by series, package type, and manufacturer. These are catalog suggestions — not verified pin-compatible alternates.