TI LM4140 Reference: Voltage Grade, Drift and Capacitor ESR | Texas Instruments
Choose LM4140 by exact output voltage and drift grade, then verify dropout, enable behavior and output-capacitor stability.
TI LM4140 Reference: Voltage Grade, Drift and Capacitor ESR
Choose LM4140 by exact output voltage and drift grade, then verify dropout, enable behavior and output-capacitor stability.
LM4140 is a precision series voltage reference with an enable input. Its standard output options include 1.024 V, 1.25 V, 2.048 V, 2.5 V and 4.096 V. The A, B and C grades share a stated 0.1% initial accuracy but specify different temperature coefficients: 3, 6 and 10 ppm/°C respectively.
The output capacitor is part of the reference’s stability design. TI specifies both capacitance and an acceptable ESR region, so replacing a tantalum capacitor with a low-ESR ceramic of the same nominal value is not automatically equivalent. Check the relevant stability curves with effective capacitance over bias and temperature.
For an ADC or DAC reference rail, budget initial error, drift, load response and noise separately. The 20 mV typical dropout headline is stated at 1 mA; it does not establish adequate headroom at every load. The data sheet specifies performance over 0°C to 70°C, so the precision budget must respect that range rather than inheriting a generic industrial temperature claim.
Key Features
- Voltage and drift gradeSpecify both output option and A/B/C accuracy grade.
- Capacitor-dependent stabilityReview effective capacitance and ESR together.
- Precision error budgetSeparate initial accuracy, temperature behavior and dynamic loading.
Target Applications
- ADC and DAC reference rails
- Precision measurement and portable instrumentation
Compare LM4140 Variants
Comparison of 10 selected variants from Texas Instruments
| Parameter | LM4140CCMX-4.1/NOPB | LM4140CCMX-4.1 | LM4140CCMX-2.0/NOPB | LM4140CCMX-1.0/NOPB | LM4140CCMX-1.2 | LM4140CCMX-1.2/NOPB | LM4140CCMX-1.0 | LM4140CCM-1.2 | LM4140CCM-1.0/NOPB | LM4140BCMX-4.1 |
|---|---|---|---|---|---|---|---|---|---|---|
| Package / Case | 8-SOIC (0.154", 3.90mm Width) | 8-SOIC (0.154", 3.90mm Width) | 8-SOIC (0.154", 3.90mm Width) | 8-SOIC (0.154", 3.90mm Width) | 8-SOIC (0.154", 3.90mm Width) | 8-SOIC (0.154", 3.90mm Width) | 8-SOIC (0.154", 3.90mm Width) | 8-SOIC (0.154", 3.90mm Width) | 8-SOIC (0.154", 3.90mm Width) | 8-SOIC (0.154", 3.90mm Width) |
| Operating Temperature | 0°C ~ 70°C (TA) | 0°C ~ 70°C (TA) | 0°C ~ 70°C (TA) | 0°C ~ 70°C (TA) | 0°C ~ 70°C (TA) | 0°C ~ 70°C (TA) | 0°C ~ 70°C (TA) | 0°C ~ 70°C (TA) | 0°C ~ 70°C (TA) | 0°C ~ 70°C (TA) |
| Current Supply | 400µA | 400µA | 375µA | 375µA | 375µA | 375µA | 375µA | 375µA | 375µA | 400µA |
| Input Voltage | 1.8V ~ 5.5V | 1.8V ~ 5.5V | 1.8V ~ 5.5V | 1.8V ~ 5.5V | 1.8V ~ 5.5V | 1.8V ~ 5.5V | 1.8V ~ 5.5V | 1.8V ~ 5.5V | 1.8V ~ 5.5V | 1.8V ~ 5.5V |
| Lifecycle Status | Active | Obsolete | Obsolete | Active | Obsolete | Active | Obsolete | Obsolete | Active | Obsolete |
| Noise 0 1 Hz to 10 Hz | 2.2µVp-p | 2.2µVp-p | 2.2µVp-p | 2.2µVp-p | 2.2µVp-p | 2.2µVp-p | 2.2µVp-p | 2.2µVp-p | 2.2µVp-p | 2.2µVp-p |
| Output Current | 8 mA | 8 mA | 8 mA | 8 mA | 8 mA | 8 mA | 8 mA | 8 mA | 8 mA | 8 mA |
| Output Type | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed | Fixed |
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | SOIC-8 | SOIC (D)-8 | 8-SOIC | 8-SOIC | SOIC (D)-8 | SOIC-8 |
| Reference Type | Series | Series | Series | Series | Series | Series | Series | Series | Series | Series |
| Supplier Device Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Temperature Coefficient | 10ppm/°C | 10ppm/°C | 10ppm/°C | 10ppm/°C | 10ppm/°C | 10ppm/°C | 10ppm/°C | 10ppm/°C | 10ppm/°C | 6ppm/°C |
| Tolerance | ±0.1% | ±0.1% | ±0.1% | ±0.1% | ±0.1% | ±0.1% | ±0.1% | ±0.1% | ±0.1% | ±0.1% |
| Voltage Output Min Fixed | 4.096V | 4.096V | 2.048V | 1.024V | 1.25V | 1.25V | 1.024V | 1.25V | 1.024V | 4.096V |
| Request Quote | Request Quote | Request Quote | Request Quote | Request Quote | Request Quote | Request Quote | Request Quote | Request Quote | Request Quote |
Base Numbers
MPN counts describe each base number’s catalog coverage; they are not a series total.
| Base Number | Description | Variants | Action |
|---|---|---|---|
| LM4140BCM | LM4140BCM variants from Texas Instruments | 4 MPNs | View Details |
| LM4140CCM | LM4140CCM variants from Texas Instruments | 2 MPNs | View Details |
Technical Specifications
LM4140 grade and load qualifiers must remain attached to the values below.
Documented parameters and selection boundaries
Frequently Asked Questions
Common technical questions about the LM4140 series.