D-CAP2 Buck Converters with Eco-mode | Texas Instruments
Evaluate TPS54328 output ripple at standby load and transient response when the system returns to full activity.
Two operating points for the same rail
The TPS54328 uses adaptive on-time D-CAP2 control for a synchronous buck stage. Its operating input range is 4.5 V to 18 V and its output rating is 3 A. The controller transitions from PWM at higher load into Eco-mode at light load.
At standby current, observe the rail over enough time to see the spacing between switching pulses. A short trace captured at full load misses the ripple pattern a sleeping sensor or audio subsystem may see.
Then apply the expected wake-up load step with the production inductor and capacitors. Check undershoot against the load’s minimum supply voltage and allow for the effective capacitance under DC bias.
Target Applications
- Equipment with long standby periods and burst loads
Technical Specifications
Two operating points for the same rail
Frequently Asked Questions
Common technical questions about the D-CAP2™, Eco-Mode™ series.