STM32F103C8 Cortex-M3 MCU Ordering Variants
Review STM32F103C8 ordering variants within STM32F1, including the full package, temperature, and packing suffix required by your BOM.
STM32F103C8 Overview
What changes between part numbers, and what to check before you lock the BOM — general-purpose circuits.
STM32F103C8 is a medium-density performance-line microcontroller base model in STM32F1. ST datasheet DS5319 identifies the STM32F103x8/xB group as Arm Cortex-M3 devices with a maximum CPU frequency of 72 MHz. Within that group, the C8 designation selects 64 KB of Flash; the documented SRAM capacity is 20 KB.
The complete ordering code remains essential. STM32F103C8T6 and its packing variants should be compared against the manufacturer ordering-information section, the populated footprint, and the temperature requirement on the purchasing drawing. Preserve the suffix when requesting a quote instead of reducing the RFQ to STM32 or STM32F103.
Before approving an alternate, check the application memory map, boot configuration, oscillator circuit, debug interface, and the signals actually routed on the board. A peripheral feature in the family description does not establish that every package exposes the pins your design uses. Review the pin-assignment tables for the selected package.
This page groups C8 ordering variants. It does not classify STM32F301 as an equivalent and does not extend C8 memory specifications to every STM32F103 density. Use the official datasheet below for electrical limits and pinouts; confirm available quantity, packing, date code, and traceability in the quotation.
Key Features
- Footprint / package: LFQFP, 48-LQFPLand pattern and thermal pad differ between these packages — run a quick footprint check before you swap variants.
- 4 distinct suffix patternsExamples: T6, T6TR, T7, T7TR. Decode suffix meaning in the ordering notes under the variant table.
Target Applications
- general-purpose circuits — design-in and field replacement
- BOM scrub where only the base prefix is known but suffix is TBD
- Second-source checks when the original MPN is constrained
Ordering Variants
Compare 4 STM32F103C8 part numbers by package, electrical parameters, lifecycle, and availability. Use RFQ for stock and lead-time confirmation.
| Part Number | Description | Package Type | Manufacturer | Availability | Action |
|---|---|---|---|---|---|
| STM32F103C8T6 | MCU 32-bit STM32F1 ARM Cortex M3 RISC 64KB Flash 2.5V/3.3V 48-Pin LQFP Tray | LFQFP | STMicroelectronics | Request availability | |
| STM32F103C8T6TR | 32-bit ARM Cortex-M3 MCU, 72MHz, 64KB Flash, LQFP | 48-LQFP | STMicroelectronics | Request availability | |
| STM32F103C8T7 | 32-bit ARM Cortex M3 MCU, 72MHz, 64KB Flash, 48-Pin LQFP | 48-LQFP | STMicroelectronics | Request availability | |
| STM32F103C8T7TR | ARM® Cortex®-M3 STM32F1 Microcontroller IC 32-Bit 72MHz 64KB (64K x 8) FLASH 48-LQFP (7x7) | 48-LQFP | STMicroelectronics | Request availability |
Ordering Code Differences
How suffixes on STM32F103C8 map to package, grade, and reel options.
STM32F103C8 uses a shared prefix; characters after the prefix encode orderable options. Two lines with the same prefix are not drop-in replacements unless the differing columns match your need.
Suffixes seen here: T6, T6TR, T7, T7TR.
What changes between rows: Package Type. Sort the table by these columns when narrowing from base number to a single MPN.
Full MPN examples: STM32F103C8T6, STM32F103C8T6TR, STM32F103C8T7, STM32F103C8T7TR.
Tip: photograph or copy the reel label — reel diameter, QTY per reel, and moisture sensitivity level (MSL) are often suffix-driven and won't show in the schematic.
How to Choose the Right STM32F103C8 Variant
Match the footprint first
Packages here: LFQFP, 48-LQFP. Open the land-pattern drawing before you substitute a different suffix.
Electrical headroom
Compare voltage and current columns in the variant table. For STM32F103C8, a suffix with lower voltage or current rating will not survive the same circuit without recalculation.
Temp grade letter matters
Commercial (0–70 °C) and industrial (−40–85 °C+) suffixes look similar in the prefix — confirm ambient + self-heating, not just the first page of the datasheet.
Copy the full MPN
Do not BOM only "STM32F103C8" — include the full suffix (e.g. T6, T6TR, T7). RFQ with reel/tube preference and required date code.
Technical Specifications
Core parameters for STM32F103C8 product family
Identity
Variant Parameters
Source STM32F103C8 with Octatronics
Request stock confirmation, lead time, date code, and pricing for all 4 ordering variants from STMicroelectronics. Our team supports active, EOL, and hard-to-find component sourcing.
- Original manufacturer parts with traceability options
- BOM upload and multi-line RFQ support
- Package, grade, and compliance verification
Frequently Asked Questions
Common technical questions about the STM32F103C8 product family.
Related Base Numbers
Related Series
Explore product families linked to this base-number page.