STMicroelectronics LDK120M
LDK120M variants from STMicroelectronics
LDK120M Overview
What changes between part numbers, and what to check before you lock the BOM — Microcontrollers.
LDK120M is a STMicroelectronics order-code family — not a single orderable MPN. This page lists 3 variants that share the same core device but differ in suffix fields (package, grade, reel/tube, electrical bin, etc.). Pick the exact full part number; substituting within the family without checking the datasheet often causes assembly or spec mismatches.
Low Noise LDO, 200mA, 5.5V In, Adj Out, SOT-23-5 Other listed variants describe: 800mV 200mA LDO, 60uA Iq, 150mV Vdo, SOT-23; 3.2V 200mA LDO, 50uA IQ, 100mV Dropout, SOT-23-5.
Suffix examples in this family: R, 08R, 32R. The characters after the base number usually encode package, temperature, or performance grade — compare the variant table column-by-column rather than assuming pin-compatible drops-in.
Example MPNs: LDK120M-R, LDK120M08R, LDK120M32R.
Key Features
- Lifecycle mix: ActiveConfirm lifecycle on the exact MPN, not just the base number prefix.
- 3 distinct suffix patternsExamples: R, 08R, 32R. Decode suffix meaning in the ordering notes under the variant table.
Target Applications
- Microcontrollers — design-in and field replacement
- BOM scrub where only the base prefix is known but suffix is TBD
- Second-source checks when the original MPN is constrained
Ordering Variants
Compare 3 LDK120M part numbers by package, electrical parameters, lifecycle, and availability. Use RFQ for stock and lead-time confirmation.
| Part Number | Description | Manufacturer | Lifecycle | RoHS | Availability | Action |
|---|---|---|---|---|---|---|
| LDK120M-R | Low Noise LDO, 200mA, 5.5V In, Adj Out, SOT-23-5 | STMicroelectronics | Active | Compliant | In Stock | |
| LDK120M08R | 800mV 200mA LDO, 60uA Iq, 150mV Vdo, SOT-23 | STMicroelectronics | Active | Compliant | In Stock | |
| LDK120M32R | 3.2V 200mA LDO, 50uA IQ, 100mV Dropout, SOT-23-5 | STMicroelectronics | Active | Compliant | In Stock |
Ordering Code Differences
How suffixes on LDK120M map to package, grade, and reel options.
LDK120M uses a shared prefix; characters after the prefix encode orderable options. Two lines with the same prefix are not drop-in replacements unless the differing columns match your need.
Suffixes seen here: R, 08R, 32R.
Full MPN examples: LDK120M-R, LDK120M08R, LDK120M32R.
Tip: photograph or copy the reel label — reel diameter, QTY per reel, and moisture sensitivity level (MSL) are often suffix-driven and won't show in the schematic.
How to Choose the Right LDK120M Microcontrollers
Match the footprint first
Pull the exact package drawing for your MPN — base-number swaps fail most often at the footprint, not the schematic.
Electrical headroom
Compare voltage and current columns in the variant table. For LDK120M, a suffix with lower voltage or current rating will not survive the same circuit without recalculation.
Temp grade letter matters
Commercial (0–70 °C) and industrial (−40–85 °C+) suffixes look similar in the prefix — confirm ambient + self-heating, not just the first page of the datasheet.
Copy the full MPN
Do not BOM only "LDK120M" — include the full suffix (e.g. R, 08R, 32R). RFQ with reel/tube preference and required date code.
Technical Specifications
Core parameters for LDK120M product family
Identity
Variant Parameters
Source LDK120M with Octatronics
Request stock confirmation, lead time, date code, and pricing for all 3 ordering variants from STMicroelectronics. Our team supports active, EOL, and hard-to-find component sourcing.
- Original manufacturer parts with traceability options
- BOM upload and multi-line RFQ support
- Package, grade, and compliance verification
Frequently Asked Questions
Common technical questions about the LDK120M product family.