Texas Instruments MAX660M/NOPB DC DC Switching Regulators
IC REG CHARGE PUMP INV 8SOIC

Same model may have multiple batches, images only for reference.
Manufacturer
Part Number (MPN)
MAX660M/NOPB
Detailed Description
IC REG CHARGE PUMP INV 8SOIC
Package
8-SOIC (0.154", 3.90mm Width)
Key Features
Package / Case: 8-SOIC (0.154", 3.90mm Width); Mounting Type: Surface Mount
Lifecycle Status
Active
RoHS State
RoHS Compliant
Datasheet
MAX660M/NOPB Datasheet
Quick Jump:
Technical Specifications
Texas Instruments MAX660M/NOPB DC DC Switching Regulators technical specifications.
General
Package / Case
8-SOIC
Mounting Type
Surface Mount
Operating Temperature
-40°C ~ 85°C (TA)
Output Type
Fixed
Max Input Voltage
5.5V
Output Current
100mA
Switching Frequency
10kHz, 80kHz
Number of Outputs
1
Topology
Charge Pump
Output Configuration
Positive or Negative
Alternate Parts Comparison (MAX660M/NOPB vs MAX660MX vs LMC7660IM/NOPB vs TL7660ID)
Side-by-side technical parameter comparison of related primary models in this product family.
| This Part | Alternate Parts | Alternate Parts | Alternate Parts | |
|---|---|---|---|---|
| Package / Case | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Mounting Type | Surface Mount | Surface Mount | Surface Mount | Surface Mount |
| Switching Frequency | 10kHz, 80kHz | 10kHz, 80kHz | 10kHz | 10kHz |
| Function | Ratiometric | Ratiometric | Ratiometric | Ratiometric |
| Max Input Voltage | 5.5V | 5.5V | 10V | 10V |
| Min Input Voltage | 1.5V | 1.5V | 1.5V | 1.5V |
| Number of Outputs | 1 | 1 | 1 | 1 |
| Output Configuration | Positive or Negative | Positive or Negative | Negative | Positive or Negative |
| Output Type | Fixed | Fixed | Fixed | Fixed |
| Output Voltage | -Vin, 2Vin | -Vin, 2Vin | -Vin | -Vin, 2Vin |
| Synchronous Rectifier | No | No | No | No |
| Topology | Charge Pump | Charge Pump | Charge Pump | Charge Pump |
| Action |
More Parts in DC DC Switching Regulators
Browse additional parts from the same category, grouped by series, package type, and manufacturer. These are catalog suggestions — not verified pin-compatible alternates.