Skip to main content

Texas Instruments SN74AC

SN74AC variants from Texas Instruments

SN74AC Datasheet

Variants

94

Mfr

Texas Instruments

Packages

PDIP, SOIC (+4 more)

Lifecycle

Active

SN74AC Overview

What changes between part numbers, and what to check before you lock the BOM — Buffers, Drivers, Receivers and Transceivers.

Key Features

  • Footprint / package: PDIP, SOIC, TSSOP, SSOP (+2 more)Land pattern and thermal pad differ between these packages — run a quick footprint check before you swap variants.
  • Lifecycle mix: ActiveConfirm lifecycle on the exact MPN, not just the base number prefix.
  • 94 distinct suffix patternsExamples: 374N, 564DWR, 74MDREP, 00NE4, 00PW (+89 more). Decode suffix meaning in the ordering notes under the variant table.

Target Applications

  • Buffers, Drivers, Receivers and Transceivers — design-in and field replacement
  • BOM scrub where only the base prefix is known but suffix is TBD
  • Second-source checks when the original MPN is constrained

Ordering Variants

Compare 94 SN74AC part numbers by package, electrical parameters, lifecycle, and availability. Use RFQ for stock and lead-time confirmation.

Part NumberDescriptionPackage TypeManufacturerLifecycleRoHSAvailabilityAction
SN74AC374NPackage: PDIP | Max Supply Voltage: 6V | Min Supply Voltage: 2V | Output Current: 24mA | Number of Outputs: 8 | Number of Bits: 8 | Frequency: 155MHz | Logic Function: D-Type, Flip-FlopPDIPTexas InstrumentsActiveCompliantIn Stock
SN74AC564DWRPackage: SOIC | Max Supply Voltage: 6V | Min Supply Voltage: 2V | Output Current: 24mA | Number of Outputs: 8 | Number of Bits: 8 | Frequency: 95MHz | Logic Function: D-Type, Flip-FlopSOICTexas InstrumentsActiveCompliantIn Stock
SN74AC74MDREPPackage: SOIC | Operating Supply Voltage: 5V | Max Supply Voltage: 6V | Min Supply Voltage: 2V | Output Current: 24mA | Number of Channels: 2 | Number of Bits: 2 | Frequency: 160MHzSOICTexas InstrumentsActiveCompliantIn Stock
SN74AC00NE4Package: PDIP | Max Supply Voltage: 6V | Min Supply Voltage: 2V | Output Current: 24mA | Number of Outputs: 1 | Number of Bits: 4 | Logic Function: NAND GATE | Max Operating Temp: 85°CPDIPTexas InstrumentsActiveCompliantIn Stock
SN74AC00PWPackage: TSSOP | Max Supply Voltage: 6V | Min Supply Voltage: 2V | Output Current: 24mA | Max Output Current: 24mA | Number of Outputs: 1 | Number of Bits: 4 | Logic Function: NAND GATETSSOPTexas InstrumentsActiveCompliantIn Stock
SN74AC14DPackage: SOIC | Operating Supply Voltage: 5V | Max Supply Voltage: 6V | Min Supply Voltage: 2V | Output Current: 24mA | Number of Bits: 6 | Logic Function: Buffer, Inverter, Schmitt Trigger | Max Operating Temp: 85°CSOICTexas InstrumentsActiveCompliantIn Stock
SN74AC14NPackage: PDIP | Max Supply Voltage: 6V | Min Supply Voltage: 2V | Output Current: 24mA | Max Output Current: 24mA | Number of Bits: 6 | Logic Function: Buffer, Inverter, Schmitt Trigger | Max Operating Temp: 85°CPDIPTexas InstrumentsActiveCompliantIn Stock
SN74AC32PWPackage: TSSOP | Max Supply Voltage: 6V | Min Supply Voltage: 2V | Output Current: 24mA | Max Output Current: 24mA | Number of Outputs: 1 | Number of Bits: 4 | Logic Function: OR GATETSSOPTexas InstrumentsActiveCompliantIn Stock
SN74AC86DRPackage: SOIC | Max Supply Voltage: 6V | Min Supply Voltage: 2V | Output Current: 50mA | Number of Outputs: 1 | Number of Bits: 4 | Logic Function: XOR GATE, OR GATE | Max Operating Temp: 85°CSOICTexas InstrumentsActiveCompliantIn Stock
SN74AC86NPackage: PDIP | Max Supply Voltage: 6V | Min Supply Voltage: 2V | Output Current: 24mA | Max Output Current: 24mA | Number of Outputs: 1 | Number of Bits: 4 | Logic Function: XOR GATE, OR GATEPDIPTexas InstrumentsActiveCompliantIn Stock
SN74AC573DBRE4Package: SSOP | Max Supply Voltage: 6V | Min Supply Voltage: 2V | Output Current: 24mA | Number of Outputs: 8 | Number of Bits: 8 | Logic Function: D-Type, Latch | Max Operating Temp: 85°CSSOPTexas InstrumentsActiveCompliantIn Stock
SN74AC00D4-ch 2-input NAND Gate IC, 2-6V, CMOS, SOIC-Texas InstrumentsActiveCompliantIn Stock
SN74AC00DR4-ch 2-input NAND Gate IC, 2-6V, 8.5ns, SOIC, CMOS-Texas InstrumentsActiveCompliantIn Stock
SN74AC00NSR4-ch 2-input NAND Gate IC, 2-6V, 8ns, CMOS, SOP-Texas InstrumentsActiveCompliantIn Stock
SN74AC00PWR4-ch 2-input NAND Gate IC, 2-6V, 8ns, CMOS, 14-TSSOP-Texas InstrumentsActiveCompliantIn Stock
SN74AC04D6-Ch CMOS Inverter IC, 2-6V, 7ns, SOIC-Texas InstrumentsActiveCompliantIn Stock
SN74AC04DBRHex Inverter IC, 6-Gate, CMOS, 5V, SSOP, 7ns PD-Texas InstrumentsActiveCompliantIn Stock
SN74AC04DR6-Ch CMOS Inverter IC, 2-6V, 10ns, SOIC, Surface Mount-Texas InstrumentsActiveCompliantIn Stock
SN74AC04PWR6-Ch Inverter IC, 2-6V, 10ns, CMOS, 14-TSSOP-Texas InstrumentsActiveCompliantIn Stock
SN74AC08D4-Gate CMOS AND Logic IC, 2-Input, 8.5ns, 6V, SOIC-Texas InstrumentsActiveCompliantIn Stock

Ordering Code Differences

How suffixes on SN74AC map to package, grade, and reel options.

How to Choose the Right SN74AC Buffers, Drivers, Receivers and Transceivers

📦

Match the footprint first

Packages here: PDIP, SOIC, TSSOP, SSOP (+2 more). Open the land-pattern drawing before you substitute a different suffix.

Electrical headroom

Compare voltage and current columns in the variant table. For SN74AC, a suffix with lower voltage or current rating will not survive the same circuit without recalculation.

🌡️

Temp grade letter matters

Commercial (0–70 °C) and industrial (−40–85 °C+) suffixes look similar in the prefix — confirm ambient + self-heating, not just the first page of the datasheet.

🔢

Copy the full MPN

Do not BOM only "SN74AC" — include the full suffix (e.g. 374N, 564DWR, 74MDREP). RFQ with reel/tube preference and required date code.

Technical Specifications

Core parameters for SN74AC product family

Identity

Base Model
SN74AC
Manufacturer
Texas Instruments
Series
74AC
Listed Variants
94

Variant Parameters

Package Type
PDIP, SOIC, TSSOP, SSOP, 20-DIP (0.300", 7.62mm), 14-DIP (0.300", 7.62mm)
Lifecycle Status
Active
RoHS Status
Compliant

Source SN74AC with Octatronics

Request stock confirmation, lead time, date code, and pricing for all 94 ordering variants from Texas Instruments. Our team supports active, EOL, and hard-to-find component sourcing.

  • Original manufacturer parts with traceability options
  • BOM upload and multi-line RFQ support
  • Package, grade, and compliance verification

Frequently Asked Questions

Common technical questions about the SN74AC product family.

SN74AC is a base / family code from Texas Instruments. You order a full MPN such as SN74AC374N, SN74AC564DWR, SN74AC74MDREP. The variant table lists 94 orderable lines with different suffixes.
Listed suffix fragments include: 374N, 564DWR, 74MDREP, 00NE4, 00PW, 14D. Typically they encode package (PDIP, SOIC, TSSOP, SSOP (+2 more)), temperature grade, and tape/reel option. Always decode on the Texas Instruments datasheet ordering guide — do not guess from pattern alone.
On this page the varying fields are: Package Type. Filter the table by the parameter you care about before picking an MPN.
Only after footprint and thermal review. Packages listed here (PDIP, SOIC, TSSOP, SSOP (+2 more)) use different land patterns and often different thermal resistance. Layout swaps need a new paste stencil at minimum, not just a BOM edit.
Lifecycle values in our listing: Active. Status is per MPN suffix — one variant can be Active while another is NRND. Check PCN for your exact suffix before multi-year commitments.
Full manufacturer MPN (not just SN74AC), quantity, needed date code, reel vs tube, and any compliance docs (CoC, RoHS, conflict minerals). If you only know the base prefix, include a photo of the existing label or reel.
Use the datasheet link in the page header. Cross-check electrical curves (SOA, saturation voltage, etc.) against your operating point — the table summarizes order codes, not every graph in the PDF.

Related Series

Explore product families linked to this base-number page.