Configuration PROMs for FPGAs
Configuration PROMs for FPGAs are essential building blocks in modern electronics design and procurement. Octatronics catalogs 282+ listed parts in this category from manufacturers such as AMD/Xilinx, Microchip Technology and Texas Instruments, with searchable part numbers, package data, lifecycle signals, and RFQ support for engineering and purchasing teams.
Product Series & Base Models
Navigate by model series to compare ordering variants and technical specifications within the Configuration PROMs for FPGAs family.
Browse Configuration PROMs for FPGAs Products
| PART NUMBER | MANUFACTURER | DESCRIPTION | STOCK | QTY / ACTION |
|---|---|---|---|---|
| AT17LV256-10NU-T | Microchip Technology | Package: SO | Package / Case: SOIC-8 | Mounting Type: Surface Mount | Supply Voltage: 3.3 V, 5 V | Memory Size: 256 kbit | Number of Pins: 8 | In Stock | |
| JBP28S42MJ | Texas Instruments | — | 1,222 | |
| JBP18S030MJ | Texas Instruments | — | 2,790 | |
| JBP28L42MJ | Texas Instruments | — | 1,368 | |
| AT17LV002-10CU | Microchip Technology | — | 1,731 | |
| AT17F16-30CU | Microchip Technology | — | 1,976 | |
| AT18F080-30XU | Microchip Technology | — | 2,064 | |
| AT18F040-30XU | Microchip Technology | — | 2,606 |
How to Choose Configuration PROMs for FPGAs
A practical selection framework for Configuration PROMs for FPGAs covering specifications, packaging, lifecycle, and sourcing on Octatronics.
Define electrical and environmental requirements
Start with the required function and operating conditions for Configuration PROMs for FPGAs, then lock in critical parameters such as function, supply voltage, interface, package, and temperature grade. Match these against datasheet limits, not catalog summaries alone.
Validate package and land pattern compatibility
Confirm the Configuration PROMs for FPGAs package matches your PCB footprint, pick-and-place constraints, and moisture sensitivity handling. Verify reel/tape or tube packaging for production.
Check lifecycle, compliance, and alternates
Review lifecycle status (Active, NRND, EOL), RoHS, and approved alternate sources for Configuration PROMs for FPGAs before committing to high-volume builds. Use Octatronics cross-reference data when a drop-in replacement is needed.
Compare manufacturers and request pricing
Filter Configuration PROMs for FPGAs by manufacturers such as AMD/Xilinx and Microchip Technology, compare key specs side by side, then submit an RFQ with quantity, target delivery, and traceability requirements.
Related Selection Resources
Top Configuration PROMs for FPGAs Manufacturers
AMD/Xilinx
AMD/Xilinx Configuration PROMs for FPGAs products are available for part-number review, stock checks, and RFQ support.
1,181 products
Microchip Technology
Microchip Technology Configuration PROMs for FPGAs products are available for part-number review, stock checks, and RFQ support.
67,462 products
Texas Instruments
Texas Instruments Configuration PROMs for FPGAs products are available for part-number review, stock checks, and RFQ support.
84,045 productsAbout Configuration PROMs for FPGAs
Frequently Asked Questions
Octatronics can help source a wide range of Configuration PROMs for FPGAs from major manufacturers worldwide, including active production parts, long-lead-time items, and hard-to-find components.
Yes. You can submit a single part number or upload a BOM with multiple parts. Our team will check stock, date code, lead time, and pricing for each item.
Availability depends on the specific part number and supplier source. For important orders, buyers can request packaging photos, labels, date code information, and traceability documents.
Yes. Octatronics supports sourcing for active, end-of-life, obsolete, and hard-to-find components through our global supplier network.
Please provide the part number, manufacturer, quantity, required date code, target price, delivery country, and whether original packaging or COC is required.
Articles & Technology
View All →DDR4 vs DDR5: Key Differences in Speed, Latency, Power, Capacity, and Compatibility
DDR5 is the newer memory standard, offering higher bandwidth, lower nominal operating voltage, improved module architecture, and better capacity scaling than DDR4. However, DDR4 remains widely used in existing PCs, embedded systems, industrial equipment, and cost-sensitive platforms. The best choice depends on your motherboard, processor, workload, budget, and long-term sourcing requirements.
Circuit Board Component Identification: How to Identify PCB Components by Markings, Shape, and Codes
Circuit board component identification means recognizing PCB parts by their reference designators, physical appearance, body markings, polarity marks, package type, and electrical function. The fastest way to identify a component is to start with the PCB silkscreen, match the reference letter to a component type, inspect its shape and package, read any value or top marking, then confirm the result with a datasheet, schematic, BOM, or measurement tool. This guide explains how to identify common PCB components such as resistors, capacitors, inductors, diodes, transistors, MOSFETs, ICs, connectors, fuses, relays, crystals, and test points. It also includes practical examples, common marking codes, polarity clues, mistakes to avoid, and a replacement sourcing checklist.
IC Top Marking Codes Explained: How to Identify SMD Chips from Package Markings
IC top marking codes are abbreviated package markings used to identify semiconductor devices, especially small SMD chips that cannot fit a full part number. Buyers should use the marking as a starting point, then verify manufacturer logo, package, pin count, date code, lot code, datasheet, packing label, and supplier documentation. Official manufacturer marking tools and datasheets should be used before relying on third-party SMD code databases.
DDR6 RAM: What We Know So Far About Next-Generation Memory
DDR6 RAM is the next planned generation of DDR memory technology after DDR5, designed to support higher bandwidth, improved efficiency, and future computing platforms with greater data movement requirements. Although DDR6 is not yet a mainstream commercial product, major memory manufacturers and platform developers are already preparing for the next stage of DRAM evolution.
How to Find Pin-Compatible Alternatives for Obsolete ICs
Finding a pin-compatible alternative for an obsolete IC is not just about matching the package. It requires a structured review of pinout, footprint, electrical parameters, functional behavior, lifecycle status, sourcing reliability, and sample validation.
Pin-to-Pin Replacement Parts: How to Check Compatibility Before Sourcing
When an original electronic component becomes obsolete, unavailable, or too expensive, a pin-to-pin replacement part can help avoid PCB redesign and keep production or repair projects moving. However, pin-to-pin compatibility does not automatically mean the part is a safe drop-in replacement. This guide explains how to check package, footprint, pinout, electrical ratings, thermal performance, timing behavior, firmware requirements, compliance status, and lifecycle risk before sourcing replacement parts. It also provides a practical checklist to help engineers, buyers, and maintenance teams reduce sourcing mistakes and verify compatibility before purchase.
How to Choose Electronic Components for Reliable Hardware Design
Learn how to choose electronic components for reliable hardware design, including specifications, lifecycle status, sourcing risks, quality checks, and BOM optimization.