Skip to main content

Texas Instruments TLC27L

TLC27L variants from Texas Instruments

Variants

37

Mfr

Texas Instruments

Packages

D, 14-SOIC (0.209", 5.30mm Width)

Lifecycle

Active

TLC27L Overview

What changes between part numbers, and what to check before you lock the BOM — Operational Amplifiers, Instrumentation Amplifiers and Buffer Amplifiers.

TLC27L is a Texas Instruments order-code family — not a single orderable MPN. This page lists 37 variants that share the same core device but differ in suffix fields (package, grade, reel/tube, electrical bin, etc.). Pick the exact full part number; substituting within the family without checking the datasheet often causes assembly or spec mismatches.

Package: D | Max Supply Voltage: 16V | Min Supply Voltage: 3V | Number of Channels: 2 | Max Operating Temp: 85°C | Min Operating Temp: -40°C | Bandwidth: 110kHz Other listed variants describe: Package: 14-SOIC (0.209", 5.30mm Width) | Mounting Type: Surface Mount | Operating Temperature: 0°C ~ 70°C | Current Supply: 57µA (x4 Channels) | Supplier Device Package: 14-SO | Number of Circuits: 4; Low-Power Op Amp, 85kHz BW, 1Ch, 3V-16V, 14uA, 8-SOIC.

Across listed variants, watch these parameters: packages: D, 14-SOIC (0.209", 5.30mm Width).

Suffix examples in this family: 7CD, 4CNS, 1CD, 1ID, 2ACP, 2ACPS, 2AIP, 2BCP. The characters after the base number usually encode package, temperature, or performance grade — compare the variant table column-by-column rather than assuming pin-compatible drops-in.

Columns that actually vary on this page: Package Type. If two rows match on MPN prefix but differ there, they are not interchangeable for production.

Example MPNs: TLC27L7CD, TLC27L4CNS, TLC27L1CD, TLC27L1ID, TLC27L2ACP, TLC27L2ACPS.

Key Features

  • Footprint / package: D, 14-SOIC (0.209", 5.30mm Width)Land pattern and thermal pad differ between these packages — run a quick footprint check before you swap variants.
  • Lifecycle mix: ActiveConfirm lifecycle on the exact MPN, not just the base number prefix.
  • 37 distinct suffix patternsExamples: 7CD, 4CNS, 1CD, 1ID, 2ACP (+32 more). Decode suffix meaning in the ordering notes under the variant table.

Target Applications

  • Operational Amplifiers, Instrumentation Amplifiers and Buffer Amplifiers — design-in and field replacement
  • BOM scrub where only the base prefix is known but suffix is TBD
  • Second-source checks when the original MPN is constrained

Ordering Variants

Compare 37 TLC27L part numbers by package, electrical parameters, lifecycle, and availability. Use RFQ for stock and lead-time confirmation.

Part NumberDescriptionPackage TypeManufacturerLifecycleRoHSAvailabilityAction
TLC27L7CDPackage: D | Max Supply Voltage: 16V | Min Supply Voltage: 3V | Number of Channels: 2 | Max Operating Temp: 85°C | Min Operating Temp: -40°C | Bandwidth: 110kHzDTexas InstrumentsActiveCompliantIn Stock
TLC27L4CNSPackage: 14-SOIC (0.209", 5.30mm Width) | Mounting Type: Surface Mount | Operating Temperature: 0°C ~ 70°C | Current Supply: 57µA (x4 Channels) | Supplier Device Package: 14-SO | Number of Circuits: 414-SOIC (0.209", 5.30mm Width)Texas InstrumentsActiveCompliantIn Stock
TLC27L1CDLow-Power Op Amp, 85kHz BW, 1Ch, 3V-16V, 14uA, 8-SOIC-Texas InstrumentsActiveCompliantIn Stock
TLC27L1IDLow-Power Op Amp, 85kHz BW, 1-Ch, 4-16V, 8-SOIC-Texas InstrumentsActiveCompliantIn Stock
TLC27L2ACP2-Ch Op Amp, 85kHz GBW, 16V, 29uA, 8-PDIP-Texas InstrumentsActiveCompliantIn Stock
TLC27L2ACPS2-Channel, 525kHz, low power, cost-optimized 16V LinCMOS op amp 8-SO 0 to 70-Texas InstrumentsActiveCompliantIn Stock
TLC27L2AIP2-Ch Op Amp, 85kHz GBW, 16V, 29uA, LinCMOS, PDIP-Texas InstrumentsActiveCompliantIn Stock
TLC27L2BCP2-Ch Op Amp, 85kHz BW, 16V, 2mV Vos, 29uA, PDIP-Texas InstrumentsActiveCompliantIn Stock
TLC27L2BID2-Ch Op Amp, 85kHz BW, 16V, 60pA Ib, 2mV Vos, 8-SOIC-Texas InstrumentsActiveCompliantIn Stock
TLC27L2BIP2-Ch Op Amp, 85kHz GBW, 16V, 2mV Vos, 60pA Ib, 8-PDIP-Texas InstrumentsActiveCompliantIn Stock
TLC27L2CDRDual Op Amp, 85kHz BW, 29uA, 3V-16V, 8-SOIC-Texas InstrumentsActiveCompliantIn Stock
TLC27L2CPSDual Op Amp, Precision, Low Power, 85kHz GBW, 0.7pA Ib, SOIC-Texas InstrumentsActiveCompliantIn Stock
TLC27L2IDDual Op Amp, 85kHz BW, 60pA Ib, 10mV Vos, 29uA, 8-SOIC-Texas InstrumentsActiveCompliantIn Stock
TLC27L2IDRDual Op Amp, 85kHz BW, 60pA Ib, 10mV Vos, 29uA Is, 8-SOIC-Texas InstrumentsActiveCompliantIn Stock
TLC27L2IPDual Op Amp, 85kHz BW, 29uA, 4-16V, 8-PDIP-Texas InstrumentsActiveCompliantIn Stock
TLC27L2IPWDual Op Amp, 85kHz BW, 29uA, 1.1mV Vos, 65dB CMRR, 8-TSSOP-Texas InstrumentsActiveCompliantIn Stock
TLC27L2IPWRDual Op Amp, 85kHz BW, 60pA Ib, 10mV Vos, 29uA Is, 8-TSSOP-Texas InstrumentsActiveCompliantIn Stock
TLC27L2MDDual Op Amp, 85kHz GBW, 60pA Ib, 1.1mV Vos, 2-Ch, 16V, -55C to 125C, SOIC-Texas InstrumentsActiveCompliantIn Stock
TLC27L2MDRG4Dual Op Amp, 85kHz GBW, 60pA Ib, 1.1mV Vos, 16V, 29uA, 8-SOIC-Texas InstrumentsActiveCompliantIn Stock
TLC27L4ACNQuad Op Amp, 110kHz BW, 5mV Vos, 16V, 4-Ch, N Package-Texas InstrumentsActiveCompliantIn Stock

Ordering Code Differences

How suffixes on TLC27L map to package, grade, and reel options.

TLC27L uses a shared prefix; characters after the prefix encode orderable options. Two lines with the same prefix are not drop-in replacements unless the differing columns match your need.

Suffixes seen here: 7CD, 4CNS, 1CD, 1ID, 2ACP, 2ACPS, 2AIP, 2BCP, 2BID, 2BIP (+27 more).

What changes between rows: Package Type. Sort the table by these columns when narrowing from base number to a single MPN.

Full MPN examples: TLC27L7CD, TLC27L4CNS, TLC27L1CD, TLC27L1ID, TLC27L2ACP.

Tip: photograph or copy the reel label — reel diameter, QTY per reel, and moisture sensitivity level (MSL) are often suffix-driven and won't show in the schematic.

How to Choose the Right TLC27L Operational Amplifiers, Instrumentation Amplifiers and Buffer Amplifiers

📦

Match the footprint first

Packages here: D, 14-SOIC (0.209", 5.30mm Width). Open the land-pattern drawing before you substitute a different suffix.

Electrical headroom

Compare voltage and current columns in the variant table. For TLC27L, a suffix with lower voltage or current rating will not survive the same circuit without recalculation.

🌡️

Temp grade letter matters

Commercial (0–70 °C) and industrial (−40–85 °C+) suffixes look similar in the prefix — confirm ambient + self-heating, not just the first page of the datasheet.

🔢

Copy the full MPN

Do not BOM only "TLC27L" — include the full suffix (e.g. 7CD, 4CNS, 1CD). RFQ with reel/tube preference and required date code.

Technical Specifications

Core parameters for TLC27L product family

Identity

Base Model
TLC27L
Manufacturer
Texas Instruments
Series
LinCMOS™
Listed Variants
37

Variant Parameters

Package Type
D, 14-SOIC (0.209", 5.30mm Width)
Lifecycle Status
Active
RoHS Status
Compliant

Source TLC27L with Octatronics

Request stock confirmation, lead time, date code, and pricing for all 37 ordering variants from Texas Instruments. Our team supports active, EOL, and hard-to-find component sourcing.

  • Original manufacturer parts with traceability options
  • BOM upload and multi-line RFQ support
  • Package, grade, and compliance verification

Frequently Asked Questions

Common technical questions about the TLC27L product family.

TLC27L is a base / family code from Texas Instruments. You order a full MPN such as TLC27L7CD, TLC27L4CNS, TLC27L1CD. The variant table lists 37 orderable lines with different suffixes.
Listed suffix fragments include: 7CD, 4CNS, 1CD, 1ID, 2ACP, 2ACPS. Typically they encode package (D, 14-SOIC (0.209", 5.30mm Width)), temperature grade, and tape/reel option. Always decode on the Texas Instruments datasheet ordering guide — do not guess from pattern alone.
On this page the varying fields are: Package Type. Filter the table by the parameter you care about before picking an MPN.
Only after footprint and thermal review. Packages listed here (D, 14-SOIC (0.209", 5.30mm Width)) use different land patterns and often different thermal resistance. Layout swaps need a new paste stencil at minimum, not just a BOM edit.
Lifecycle values in our listing: Active. Status is per MPN suffix — one variant can be Active while another is NRND. Check PCN for your exact suffix before multi-year commitments.
Full manufacturer MPN (not just TLC27L), quantity, needed date code, reel vs tube, and any compliance docs (CoC, RoHS, conflict minerals). If you only know the base prefix, include a photo of the existing label or reel.

Related Series

Explore product families linked to this base-number page.