Texas Instruments DS90CR
DS90CR variants from Texas Instruments
DS90CR Overview
What changes between part numbers, and what to check before you lock the BOM — Drivers, Receivers and Transceivers.
Key Features
- Footprint / package: TSSOP, TQFP, 56-TFSOP (0.240", 6.10mm Width), 100-TQFPLand pattern and thermal pad differ between these packages — run a quick footprint check before you swap variants.
- Lifecycle mix: ActiveConfirm lifecycle on the exact MPN, not just the base number prefix.
- 31 distinct suffix patternsExamples: 215MTD, 287MTD, 484AVJD/NOPB, 215MTD/NOPB, 215MTDX/NOPB (+26 more). Decode suffix meaning in the ordering notes under the variant table.
Target Applications
- Drivers, Receivers and Transceivers — design-in and field replacement
- BOM scrub where only the base prefix is known but suffix is TBD
- Second-source checks when the original MPN is constrained
Ordering Variants
Compare 31 DS90CR part numbers by package, electrical parameters, lifecycle, and availability. Use RFQ for stock and lead-time confirmation.
| Part Number | Description | Package Type | Manufacturer | Lifecycle | RoHS | Availability | Action |
|---|---|---|---|---|---|---|---|
| DS90CR215MTD | Package: TSSOP | Operating Supply Voltage: 3.3V | Max Supply Voltage: 3.6V | Min Supply Voltage: 3V | Data Rate: 1386Mbps | Max Operating Temp: 85°C | Min Operating Temp: -40°C | TSSOP | Texas Instruments | Active | Compliant | In Stock | |
| DS90CR287MTD | Package: TSSOP | Operating Supply Voltage: 3.3V | Max Supply Voltage: 3.6V | Min Supply Voltage: 3V | Output Voltage: 3.3V | Max Output Current: 120mA | Number of Channels: 1 | Interface: LVDS | TSSOP | Texas Instruments | Active | Compliant | In Stock | |
| DS90CR484AVJD/NOPB | Package: TQFP | Operating Supply Voltage: 3.3V | Max Supply Voltage: 3.6V | Min Supply Voltage: 3V | Number of Outputs: 48 | Data Rate: 672Mbps | Max Operating Temp: 70°C | Min Operating Temp: -10°C | TQFP | Texas Instruments | Active | Compliant | In Stock | |
| DS90CR215MTD/NOPB | +3.3V Rising Edge Data Strobe LVDS 21-Bit Channel Link Transmitter - 66 MHz 48-TSSOP -40 to 85 | - | Texas Instruments | Active | Compliant | In Stock | |
| DS90CR215MTDX/NOPB | +3.3V Rising Edge Data Strobe LVDS 21-Bit Channel Link Transmitter - 66 MHz 48-TSSOP -40 to 85 | - | Texas Instruments | Active | Compliant | In Stock | |
| DS90CR216AMTD/NOPB | 3.3V LVDS Receiver, 21-Bit, 1386Mbps, 66MHz, TSSOP | - | Texas Instruments | Active | Compliant | In Stock | |
| DS90CR216AMTDX/NOPB | +3.3V Rising Edge Data Strobe LVDS Receiver 21-Bit Channel Link - 66 MHz 48-TSSOP -40 to 85 | - | Texas Instruments | Active | Compliant | In Stock | |
| DS90CR216MTD/NOPB | LVDS Bus Transceiver, 3.3V, 21-Bit, 1386Mbps, 66MHz, 48-TSSOP | - | Texas Instruments | Active | Compliant | In Stock | |
| DS90CR217MTDX/NOPB | +3.3V Rising Edge Data Strobe LVDS 21-Bit Channel Link Transmitter - 85 MHz 48-TSSOP -10 to 70 | - | Texas Instruments | Active | Compliant | In Stock | |
| DS90CR218AMTDX/NOPB | +3.3V Rising Edge Data Strobe LVDS 21-Bit Channel Link Receiver - 85 MHz 48-TSSOP -10 to 70 | - | Texas Instruments | Active | Compliant | In Stock | |
| DS90CR285MTD/NOPB | LVDS Transmitter, 1848Mbps, 3.3V, 28-Ch, 66MHz, TSSOP | - | Texas Instruments | Active | Compliant | In Stock | |
| DS90CR285MTDX/NOPB | LVDS 28-Bit Transmitter, 1848Mbps, 3.3V, 66MHz, TSSOP | - | Texas Instruments | Active | Compliant | In Stock | |
| DS90CR286AMTD/NOPB | LVDS 28-Bit Receiver, 1848Mbps, 3.3V, 56-TSSOP | - | Texas Instruments | Active | Compliant | In Stock | |
| DS90CR286AMTDX/NOPB | +3.3V Rising Edge Data Strobe LVDS 28-Bit Channel Link Receiver - 66 MHz 56-TSSOP -40 to 85 | - | Texas Instruments | Active | Compliant | In Stock | |
| DS90CR286AQMT/NOPB | LVDS Receiver 1848Mbps 56-Pin TSSOP SMT | - | Texas Instruments | Active | Compliant | In Stock | |
| DS90CR286AQMTX/NOPB | LVDS Receiver 1848Mbps 56-Pin TSSOP SMT | - | Texas Instruments | Active | Compliant | In Stock | |
| DS90CR286ATDGGRQ1 | LVDS Receiver 1848Mbps Automotive 56-Pin TSSOP T/R | - | Texas Instruments | Active | Compliant | In Stock | |
| DS90CR286MTD/NOPB | +3.3V Rising Edge Data Strobe LVDS 28-Bit Channel - 66 MHz 56-TSSOP | - | Texas Instruments | Active | Compliant | In Stock | |
| DS90CR287MTD/NOPB | LVDS Transmitter 2380Mbps 4-Ch 56-Pin TSSOP | - | Texas Instruments | Active | Compliant | In Stock | |
| DS90CR287MTDX/NOPB | LVDS 28-Bit Transmitter, 2380Mbps, 3.3V, 85MHz, TSSOP | - | Texas Instruments | Active | Compliant | In Stock |
Ordering Code Differences
How suffixes on DS90CR map to package, grade, and reel options.
How to Choose the Right DS90CR Drivers, Receivers and Transceivers
Match the footprint first
Packages here: TSSOP, TQFP, 56-TFSOP (0.240", 6.10mm Width), 100-TQFP. Open the land-pattern drawing before you substitute a different suffix.
Electrical headroom
Compare voltage and current columns in the variant table. For DS90CR, a suffix with lower voltage or current rating will not survive the same circuit without recalculation.
Temp grade letter matters
Commercial (0–70 °C) and industrial (−40–85 °C+) suffixes look similar in the prefix — confirm ambient + self-heating, not just the first page of the datasheet.
Copy the full MPN
Do not BOM only "DS90CR" — include the full suffix (e.g. 215MTD, 287MTD, 484AVJD/NOPB). RFQ with reel/tube preference and required date code.
Technical Specifications
Core parameters for DS90CR product family
Identity
Base Model
DS90CR
Manufacturer
Texas Instruments
Series
DS90CR484A
Listed Variants
31
Variant Parameters
Package Type
TSSOP, TQFP, 56-TFSOP (0.240", 6.10mm Width), 100-TQFP
Lifecycle Status
Active
RoHS Status
Compliant
Source DS90CR with Octatronics
Request stock confirmation, lead time, date code, and pricing for all 31 ordering variants from Texas Instruments. Our team supports active, EOL, and hard-to-find component sourcing.
- Original manufacturer parts with traceability options
- BOM upload and multi-line RFQ support
- Package, grade, and compliance verification
Frequently Asked Questions
Common technical questions about the DS90CR product family.
DS90CR is a base / family code from Texas Instruments. You order a full MPN such as DS90CR215MTD, DS90CR287MTD, DS90CR484AVJD/NOPB. The variant table lists 31 orderable lines with different suffixes.
Listed suffix fragments include: 215MTD, 287MTD, 484AVJD/NOPB, 215MTD/NOPB, 215MTDX/NOPB, 216AMTD/NOPB. Typically they encode package (TSSOP, TQFP, 56-TFSOP (0.240", 6.10mm Width), 100-TQFP), temperature grade, and tape/reel option. Always decode on the Texas Instruments datasheet ordering guide — do not guess from pattern alone.
On this page the varying fields are: Package Type. Filter the table by the parameter you care about before picking an MPN.
Only after footprint and thermal review. Packages listed here (TSSOP, TQFP, 56-TFSOP (0.240", 6.10mm Width), 100-TQFP) use different land patterns and often different thermal resistance. Layout swaps need a new paste stencil at minimum, not just a BOM edit.
Lifecycle values in our listing: Active. Status is per MPN suffix — one variant can be Active while another is NRND. Check PCN for your exact suffix before multi-year commitments.
Full manufacturer MPN (not just DS90CR), quantity, needed date code, reel vs tube, and any compliance docs (CoC, RoHS, conflict minerals). If you only know the base prefix, include a photo of the existing label or reel.
Use the datasheet link in the page header. Cross-check electrical curves (SOA, saturation voltage, etc.) against your operating point — the table summarizes order codes, not every graph in the PDF.