STMicroelectronics LIS3D
LIS3D variants from STMicroelectronics
LIS3D Overview
What changes between part numbers, and what to check before you lock the BOM — Sensors.
LIS3D is a STMicroelectronics order-code family — not a single orderable MPN. This page lists 2 variants that share the same core device but differ in suffix fields (package, grade, reel/tube, electrical bin, etc.). Pick the exact full part number; substituting within the family without checking the datasheet often causes assembly or spec mismatches.
Digital 3-axis accelerometer, ultra-low-power, ±2g/±4g/±8g/±16g full scale, high-speed I2C/SPI digital output, embedded FIFO, LLGA 16 3x3x1.0 package Other listed variants describe: 3-Axis Accelerometer, Ultra-Low-Power, 16-bit, I2C/SPI, LGA.
Suffix examples in this family: ETR, HTR. The characters after the base number usually encode package, temperature, or performance grade — compare the variant table column-by-column rather than assuming pin-compatible drops-in.
Example MPNs: LIS3DETR, LIS3DHTR.
Key Features
- Lifecycle mix: ActiveConfirm lifecycle on the exact MPN, not just the base number prefix.
- 2 distinct suffix patternsExamples: ETR, HTR. Decode suffix meaning in the ordering notes under the variant table.
Target Applications
- Sensors — design-in and field replacement
- BOM scrub where only the base prefix is known but suffix is TBD
- Second-source checks when the original MPN is constrained
Ordering Variants
Compare 2 LIS3D part numbers by package, electrical parameters, lifecycle, and availability. Use RFQ for stock and lead-time confirmation.
| Part Number | Description | Manufacturer | Lifecycle | RoHS | Availability | Action |
|---|---|---|---|---|---|---|
| LIS3DETR | Digital 3-axis accelerometer, ultra-low-power, ±2g/±4g/±8g/±16g full scale, high-speed I2C/SPI digital output, embedded FIFO, LLGA 16 3x3x1.0 package | STMicroelectronics | Active | Compliant | In Stock | |
| LIS3DHTR | 3-Axis Accelerometer, Ultra-Low-Power, 16-bit, I2C/SPI, LGA | STMicroelectronics | Active | Compliant | In Stock |
Ordering Code Differences
How suffixes on LIS3D map to package, grade, and reel options.
LIS3D uses a shared prefix; characters after the prefix encode orderable options. Two lines with the same prefix are not drop-in replacements unless the differing columns match your need.
Suffixes seen here: ETR, HTR.
Full MPN examples: LIS3DETR, LIS3DHTR.
Tip: photograph or copy the reel label — reel diameter, QTY per reel, and moisture sensitivity level (MSL) are often suffix-driven and won't show in the schematic.
How to Choose the Right LIS3D Sensors
Match the footprint first
Pull the exact package drawing for your MPN — base-number swaps fail most often at the footprint, not the schematic.
Electrical headroom
Compare voltage and current columns in the variant table. For LIS3D, a suffix with lower voltage or current rating will not survive the same circuit without recalculation.
Temp grade letter matters
Commercial (0–70 °C) and industrial (−40–85 °C+) suffixes look similar in the prefix — confirm ambient + self-heating, not just the first page of the datasheet.
Copy the full MPN
Do not BOM only "LIS3D" — include the full suffix (e.g. ETR, HTR). RFQ with reel/tube preference and required date code.
Technical Specifications
Core parameters for LIS3D product family
Identity
Variant Parameters
Source LIS3D with Octatronics
Request stock confirmation, lead time, date code, and pricing for all 2 ordering variants from STMicroelectronics. Our team supports active, EOL, and hard-to-find component sourcing.
- Original manufacturer parts with traceability options
- BOM upload and multi-line RFQ support
- Package, grade, and compliance verification
Frequently Asked Questions
Common technical questions about the LIS3D product family.