Skip to main content

Analog Devices MAX997

MAX997 variants from Analog Devices

Variants

2

Mfr

Analog Devices

Packages

8-SOIC (0.154", 3.90mm Width), 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)

Lifecycle

Active

MAX997 Overview

What changes between part numbers, and what to check before you lock the BOM — Comparators.

MAX997 is a Analog Devices order-code family — not a single orderable MPN. This page lists 2 variants that share the same core device but differ in suffix fields (package, grade, reel/tube, electrical bin, etc.). Pick the exact full part number; substituting within the family without checking the datasheet often causes assembly or spec mismatches.

Package: 8-SOIC (0.154", 3.90mm Width) | Mounting Type: Surface Mount | Operating Temperature: -40°C ~ 85°C | Type: General Purpose | Output Type: CMOS, TTL | Supplier Device Package: 8-SOIC Other listed variants describe: Package: 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Mounting Type: Surface Mount | Operating Temperature: -40°C ~ 85°C | Type: General Purpose | Output Type: CMOS, TTL | Supplier Device Package: 8-uMAX/uSOP.

Across listed variants, watch these parameters: packages: 8-SOIC (0.154", 3.90mm Width), 8-TSSOP, 8-MSOP (0.118", 3.00mm Width).

Suffix examples in this family: ESA+T, EUA+T. The characters after the base number usually encode package, temperature, or performance grade — compare the variant table column-by-column rather than assuming pin-compatible drops-in.

Columns that actually vary on this page: Package Type. If two rows match on MPN prefix but differ there, they are not interchangeable for production.

Example MPNs: MAX997ESA+T, MAX997EUA+T.

Key Features

  • Footprint / package: 8-SOIC (0.154", 3.90mm Width), 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)Land pattern and thermal pad differ between these packages — run a quick footprint check before you swap variants.
  • Lifecycle mix: ActiveConfirm lifecycle on the exact MPN, not just the base number prefix.
  • 2 distinct suffix patternsExamples: ESA+T, EUA+T. Decode suffix meaning in the ordering notes under the variant table.

Target Applications

  • Comparators — design-in and field replacement
  • BOM scrub where only the base prefix is known but suffix is TBD
  • Second-source checks when the original MPN is constrained

Ordering Variants

Compare 2 MAX997 part numbers by package, electrical parameters, lifecycle, and availability. Use RFQ for stock and lead-time confirmation.

Part NumberDescriptionPackage TypeManufacturerLifecycleRoHSAvailabilityAction
MAX997ESA+TPackage: 8-SOIC (0.154", 3.90mm Width) | Mounting Type: Surface Mount | Operating Temperature: -40°C ~ 85°C | Type: General Purpose | Output Type: CMOS, TTL | Supplier Device Package: 8-SOIC8-SOIC (0.154", 3.90mm Width)Analog DevicesActiveCompliantIn Stock
MAX997EUA+TPackage: 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | Mounting Type: Surface Mount | Operating Temperature: -40°C ~ 85°C | Type: General Purpose | Output Type: CMOS, TTL | Supplier Device Package: 8-uMAX/uSOP8-TSSOP, 8-MSOP (0.118", 3.00mm Width)Analog DevicesActiveCompliantIn Stock

Ordering Code Differences

How suffixes on MAX997 map to package, grade, and reel options.

MAX997 uses a shared prefix; characters after the prefix encode orderable options. Two lines with the same prefix are not drop-in replacements unless the differing columns match your need.

Suffixes seen here: ESA+T, EUA+T.

What changes between rows: Package Type. Sort the table by these columns when narrowing from base number to a single MPN.

Full MPN examples: MAX997ESA+T, MAX997EUA+T.

Tip: photograph or copy the reel label — reel diameter, QTY per reel, and moisture sensitivity level (MSL) are often suffix-driven and won't show in the schematic.

How to Choose the Right MAX997 Comparators

📦

Match the footprint first

Packages here: 8-SOIC (0.154", 3.90mm Width), 8-TSSOP, 8-MSOP (0.118", 3.00mm Width). Open the land-pattern drawing before you substitute a different suffix.

Electrical headroom

Compare voltage and current columns in the variant table. For MAX997, a suffix with lower voltage or current rating will not survive the same circuit without recalculation.

🌡️

Temp grade letter matters

Commercial (0–70 °C) and industrial (−40–85 °C+) suffixes look similar in the prefix — confirm ambient + self-heating, not just the first page of the datasheet.

🔢

Copy the full MPN

Do not BOM only "MAX997" — include the full suffix (e.g. ESA+T, EUA+T). RFQ with reel/tube preference and required date code.

Technical Specifications

Core parameters for MAX997 product family

Identity

Base Model
MAX997
Manufacturer
Analog Devices
Series
Beyond-the-Rails™
Listed Variants
2

Variant Parameters

Package Type
8-SOIC (0.154", 3.90mm Width), 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
Lifecycle Status
Active
RoHS Status
Compliant

Source MAX997 with Octatronics

Request stock confirmation, lead time, date code, and pricing for all 2 ordering variants from Analog Devices. Our team supports active, EOL, and hard-to-find component sourcing.

  • Original manufacturer parts with traceability options
  • BOM upload and multi-line RFQ support
  • Package, grade, and compliance verification

Frequently Asked Questions

Common technical questions about the MAX997 product family.

MAX997 is a base / family code from Analog Devices. You order a full MPN such as MAX997ESA+T, MAX997EUA+T. The variant table lists 2 orderable lines with different suffixes.
Listed suffix fragments include: ESA+T, EUA+T. Typically they encode package (8-SOIC (0.154", 3.90mm Width), 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)), temperature grade, and tape/reel option. Always decode on the Analog Devices datasheet ordering guide — do not guess from pattern alone.
On this page the varying fields are: Package Type. Filter the table by the parameter you care about before picking an MPN.
Only after footprint and thermal review. Packages listed here (8-SOIC (0.154", 3.90mm Width), 8-TSSOP, 8-MSOP (0.118", 3.00mm Width)) use different land patterns and often different thermal resistance. Layout swaps need a new paste stencil at minimum, not just a BOM edit.
Lifecycle values in our listing: Active. Status is per MPN suffix — one variant can be Active while another is NRND. Check PCN for your exact suffix before multi-year commitments.
Full manufacturer MPN (not just MAX997), quantity, needed date code, reel vs tube, and any compliance docs (CoC, RoHS, conflict minerals). If you only know the base prefix, include a photo of the existing label or reel.

Related Series

Explore product families linked to this base-number page.