Skip to main content

AMD/Xilinx XC2C128

XC2C128 variants from AMD/Xilinx

Variants

3

Mfr

AMD/Xilinx

Packages

132-TFBGA, CSPBGA, 100-TQFP

Lifecycle

Active

XC2C128 Overview

What changes between part numbers, and what to check before you lock the BOM — CPLDs (Complex Programmable Logic Devices).

XC2C128 is a AMD/Xilinx order-code family — not a single orderable MPN. This page lists 3 variants that share the same core device but differ in suffix fields (package, grade, reel/tube, electrical bin, etc.). Pick the exact full part number; substituting within the family without checking the datasheet often causes assembly or spec mismatches.

Supply Voltage: 1.8 | Max Operating Temp: 70 | Min Operating Temp: 0 | Number of Pins: 100 | Terminal Position: QUAD | Jedec Package Code: S-PQFP-G100 Other listed variants describe: Package: 132-TFBGA, CSPBGA | Mounting Type: Surface Mount | Operating Temperature: -40°C ~ 85°C (TA) | Supplier Device Package: 132-CSPBGA (8x8) | Programmable Type: In System Programmable | Delay Time Tpd 1 Max: 7 ns; Package: 100-TQFP | Mounting Type: Surface Mount | Operating Temperature: -40°C ~ 85°C (TA) | Supplier Device Package: 100-VQFP (14x14) | Programmable Type: In System Programmable | Delay Time Tpd 1 Max: 7 ns.

Across listed variants, watch these parameters: packages: 132-TFBGA, CSPBGA, 100-TQFP.

Suffix examples in this family: 7VQG100C, 7CPG132I, 7VQG100I. The characters after the base number usually encode package, temperature, or performance grade — compare the variant table column-by-column rather than assuming pin-compatible drops-in.

Columns that actually vary on this page: Package Type. If two rows match on MPN prefix but differ there, they are not interchangeable for production.

Example MPNs: XC2C128-7VQG100C, XC2C128-7CPG132I, XC2C128-7VQG100I.

Key Features

  • Footprint / package: 132-TFBGA, CSPBGA, 100-TQFPLand pattern and thermal pad differ between these packages — run a quick footprint check before you swap variants.
  • Lifecycle mix: ActiveConfirm lifecycle on the exact MPN, not just the base number prefix.
  • 3 distinct suffix patternsExamples: 7VQG100C, 7CPG132I, 7VQG100I. Decode suffix meaning in the ordering notes under the variant table.

Target Applications

  • CPLDs (Complex Programmable Logic Devices) — design-in and field replacement
  • BOM scrub where only the base prefix is known but suffix is TBD
  • Second-source checks when the original MPN is constrained

Ordering Variants

Compare 3 XC2C128 part numbers by package, electrical parameters, lifecycle, and availability. Use RFQ for stock and lead-time confirmation.

Part NumberDescriptionPackage TypeManufacturerLifecycleRoHSAvailabilityAction
XC2C128-7VQG100CSupply Voltage: 1.8 | Max Operating Temp: 70 | Min Operating Temp: 0 | Number of Pins: 100 | Terminal Position: QUAD | Jedec Package Code: S-PQFP-G100-AMD/XilinxActiveCompliantIn Stock
XC2C128-7CPG132IPackage: 132-TFBGA, CSPBGA | Mounting Type: Surface Mount | Operating Temperature: -40°C ~ 85°C (TA) | Supplier Device Package: 132-CSPBGA (8x8) | Programmable Type: In System Programmable | Delay Time Tpd 1 Max: 7 ns132-TFBGA, CSPBGAAMD/XilinxActiveCompliantIn Stock
XC2C128-7VQG100IPackage: 100-TQFP | Mounting Type: Surface Mount | Operating Temperature: -40°C ~ 85°C (TA) | Supplier Device Package: 100-VQFP (14x14) | Programmable Type: In System Programmable | Delay Time Tpd 1 Max: 7 ns100-TQFPAMD/XilinxActiveCompliantIn Stock

Ordering Code Differences

How suffixes on XC2C128 map to package, grade, and reel options.

XC2C128 uses a shared prefix; characters after the prefix encode orderable options. Two lines with the same prefix are not drop-in replacements unless the differing columns match your need.

Suffixes seen here: 7VQG100C, 7CPG132I, 7VQG100I.

What changes between rows: Package Type. Sort the table by these columns when narrowing from base number to a single MPN.

Full MPN examples: XC2C128-7VQG100C, XC2C128-7CPG132I, XC2C128-7VQG100I.

Tip: photograph or copy the reel label — reel diameter, QTY per reel, and moisture sensitivity level (MSL) are often suffix-driven and won't show in the schematic.

How to Choose the Right XC2C128 CPLDs (Complex Programmable Logic Devices)

📦

Match the footprint first

Packages here: 132-TFBGA, CSPBGA, 100-TQFP. Open the land-pattern drawing before you substitute a different suffix.

Electrical headroom

Compare voltage and current columns in the variant table. For XC2C128, a suffix with lower voltage or current rating will not survive the same circuit without recalculation.

🌡️

Temp grade letter matters

Commercial (0–70 °C) and industrial (−40–85 °C+) suffixes look similar in the prefix — confirm ambient + self-heating, not just the first page of the datasheet.

🔢

Copy the full MPN

Do not BOM only "XC2C128" — include the full suffix (e.g. 7VQG100C, 7CPG132I, 7VQG100I). RFQ with reel/tube preference and required date code.

Technical Specifications

Core parameters for XC2C128 product family

Identity

Base Model
XC2C128
Manufacturer
AMD/Xilinx
Listed Variants
3

Variant Parameters

Package Type
132-TFBGA, CSPBGA, 100-TQFP
Lifecycle Status
Active
RoHS Status
Compliant

Source XC2C128 with Octatronics

Request stock confirmation, lead time, date code, and pricing for all 3 ordering variants from AMD/Xilinx. Our team supports active, EOL, and hard-to-find component sourcing.

  • Original manufacturer parts with traceability options
  • BOM upload and multi-line RFQ support
  • Package, grade, and compliance verification

Frequently Asked Questions

Common technical questions about the XC2C128 product family.

XC2C128 is a base / family code from AMD/Xilinx. You order a full MPN such as XC2C128-7VQG100C, XC2C128-7CPG132I, XC2C128-7VQG100I. The variant table lists 3 orderable lines with different suffixes.
Listed suffix fragments include: 7VQG100C, 7CPG132I, 7VQG100I. Typically they encode package (132-TFBGA, CSPBGA, 100-TQFP), temperature grade, and tape/reel option. Always decode on the AMD/Xilinx datasheet ordering guide — do not guess from pattern alone.
On this page the varying fields are: Package Type. Filter the table by the parameter you care about before picking an MPN.
Only after footprint and thermal review. Packages listed here (132-TFBGA, CSPBGA, 100-TQFP) use different land patterns and often different thermal resistance. Layout swaps need a new paste stencil at minimum, not just a BOM edit.
Lifecycle values in our listing: Active. Status is per MPN suffix — one variant can be Active while another is NRND. Check PCN for your exact suffix before multi-year commitments.
Full manufacturer MPN (not just XC2C128), quantity, needed date code, reel vs tube, and any compliance docs (CoC, RoHS, conflict minerals). If you only know the base prefix, include a photo of the existing label or reel.